If you have the small printed card then you should have the PIN. But if you have a Corsa C or any of the variants built on the same platform (Meriva A, Tigra B or Combo) you don't need the PIN if you have the correct OpCom because it can extract the PIN from the EEPROM directly which more or less saves you the cost of buying an OpCom straight off. Sorry if this reapeats earlier requests. I am trying to reprogram a key fob I got of ebay. I am using an opcom (chineese clone!) All connects through to body then I try to program comes up with delete all fob and reprogram whwn I press reprogram I get See Checking Procedure Before Programming.
This is a guide for you to use OPCOM interface to program BCM for Opel Corsa C 2002. OP-COM is good to reset, replace and reprogram BCM for Opel and Vauxhall cars!
Step1. Open OP-COM software. Click “Diagnostics” and choose “2002” and “Corsa-C”. Choose “Body” then “Body Control Module”.
Step2. Click “Programming” then “Programming”.
Opcom Transponder Key Coding
Choose “Security Code” and enter correct security code, click “OK”.
Step3. Click “Reset BCM” and OPCOM will reset BCM successfully soon. (Please wait at least 10 seconds after you’ve turn off ignition)
Opcom Key Coding Tutorial
Click “Program BCM” and input security code. It will show “Successfully Programmed”. Then input security code again and you can see “Correct security code entered”.
Step4. Click “Erase Remote Keys” and it show you soon “Reset Completed Successfully”.
Then click “Programming Remote Car Key” and press any button of the remote key. Remote key programmed successfully.
Step5. Click “Vehicle Identification Number Programming” to program VIN. Enter VIN number and click “OK”.
Now go back to main menu and choose “Measuring Blocks”.
Opcom Key Coding Bootcamp
Step6. Click “Fault Codes and clear all DTC fault codes from ECM, IPC, SDM, BCM and check if all is working. After that OPCOM (OPCOM V2012 V1.59) can successfully program Opel Corsa C BCM module.